Factory Sale JYQD-V8.8B 110V 220V AC BLDC Motor Controller for Household Appliance
Model No. JYQD-V8.8B
BLDC Motor Driver Major Parameters
Power Input:90-265VAC
Rated power:130W
Suitability :Sensorlesss motor
Max power:250W
Max curernt: 1A
---------------------------------------------------------------------------
Protection: Over-current, short circuit, over voltage, under voltage, locked rotor, over-heating
Control algorithms: Square wave
Dimensions:77mmx62mmx33mm
Speed Control:PWM/0-5V
Speed feedback signal output:Yes
Working temp:-20℃—85℃
Application Guidelines
1. Confirm that the voltage and power parameters of the motor not exceed the range as specified.
2. JYQD-V8.8B is driver board without housing and heatsink, it can drive the motor below 100 watt without any heatsink, but needs normal ventilation.
3. The 5V output port on the drive board is forbidden to connect external power equipment. It is only applicable to external potentiometer or switch for speed adjustment, commutation and enabling operation
BLDC Motor Driver’s Application
Electric skateboard
Electric scooter
Electric wheelchair
Hoverboard
Electric unicycle
Electric Moped
Electric go kart
RC car
Industrial robot
Logistics conveyor belt
Automation equipment
CNC machines
Self-propelled lawn mowers
BLDC Motor Driver’s Wiring
1. Control port
5V —Driver board internal output voltage, external potentiometer or switch for speed adjustment and reversing
operation
Z/F —Rotating direction control ports. Connect “5V” high level or no connect is Forward direction, connect 0 V low level or
connect to GND is reverse direction.
VR —Speed control port. Analog voltage linear speed regulation 0.1v -5V, The input resistance is 20K Ohm ,connect with GND when input PWM speed regulation, PWM frequency:1K-20KHZ; Duty cycle 0-100%,PWM amplitude:5V
M— Speed pulse signal output,5V pulse signal
GND—Used for Driver board internal control
2. Power port
MA ----motor phase A
MB ---- motor phase B
MC---- motor phase C
GND ----DC-
VCC----DC +
4. Use shielded wires if the drivers board has more than 50 cm distance from the motor, otherwise it may lead to abnormal driving, affecting the normal use
5. Control port distance: 2.54mm,Power port distance:3.96 mm
6. Pay attention to the insulation between the driver MOSFET and the heatsink or the installation plate.
BLDC Motor Driver’s Dimensional Drawing
Product Tags:
|
|
Factory Sale JYQD-V8.8B 110V 220V AC BLDC Motor Controller for Household Appliance. Images
|
